Implementación de un banco didáctico para el manejo de Software y Hardware usados en la programación de procesadores de inyección para el laboratorio de motores de combustión interna de la Escuela de Ingeniería Automotriz de la ESPOCH.

Abstract

This work aims to implement degree at the School of Automotive Engineering ESPOCH a training bank management software and hardware used in the injection controller programming. It was investigated on the basic principles of operation of the electronic injection and its components as well as the use and management of software processor injection. Subsequently the required software on the computer programming that was implemented in the gasoline engine in the engine laboratory and finally analyzed and compared the different types of programming to be used in different operational requirements was selected. The programmable computer MegaSquirt, implemented, has the same principle of communication between the sensors send a signal to the computer and this in turn gives the order to control the actuators. It is a fully programmable computer in the following parameters. the advancement of the ignition spark, injection pulses, fuel quantity, barometric corrections, corrections relating to the air temperature or turn the coolant, and a microprocessor much faster the original with them is able to produce more horse power and harness the volumetric efficiency of the engine, the same one that contains a serial connection with a serial interface of a computer PC laptop or notebook, all this is achieved with software that this case because it is the MegaSquirt is called as TunersStudio MS. According to the operational requirements of this test it was analyzed and compared the different types of programming, prior to choosing and implementing appropriate in educational purposes. The armed motor gasoline in the engine laboratory, computer features and specific, selected and implemented program in which students of the career implement their theoretical knowledge of program the driver„s injection.